
Indoor/outdoor P4 portable P4mm SMD 512*512mm Die-casting Aluminum Panel Video Wall Pantallas LED P4 Indoor LED Rental Screen
1. SMD 3-in-1 (high quality SMD2121 LEDs), wide viewing angle, nice video performance.
2. 512x512mm Die-casting aluminum LED cabinets, nice appearance and good quality
3. super thin, light weight, with handles and fast locks, easy to install
4. seamless and flatness to ensure high quality video effect
5. support VGA,DVI,HDMI,TV programs,VCD,DVD,live show,etc.
6. flightcase package, easy to take the LED display to different places according to your need.
7. suitable for stage rental, event show, concert, mobile advertising, etc
♦ Product specification
indoor SMD P4 | ||||||||||||||
Lamp size | 2121 | |||||||||||||
Resolution/mm | 4 | |||||||||||||
Pixel configuration | RGB 3 in 1 | |||||||||||||
Pixel density/pixels/m² | 62500/m² | |||||||||||||
Module resolution | 32x32 | |||||||||||||
Module size/mm | 128x128 | |||||||||||||
View distance | ≥3m | |||||||||||||
Single point brightness adjust | Can be added | |||||||||||||
Single point color adjust | Can be added | |||||||||||||
White balance brightness | >2000cd/㎡ | |||||||||||||
Color temperature | 6500K-9500K | |||||||||||||
Horizontal view angle | 120(degrees) | |||||||||||||
Vertical view angle | 60(degrees) | |||||||||||||
Signal Process bit | 10 or 14 bit | |||||||||||||
Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 | |||||||||||||
Control distances | Internet cable:100m, multimembrane:500m, monofilm:5km | |||||||||||||
Driving mode | Constant driving current | |||||||||||||
Scanning mode | 1/16 | |||||||||||||
Frame rate | 60Hz | |||||||||||||
Refresh frequency | >4200Hz | |||||||||||||
Control mode | Computer synchronous | |||||||||||||
Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted 255 steps. No grey loss | |||||||||||||
Out of control point | <1/10000 | |||||||||||||
Working hours | ≥72hours | |||||||||||||
Mean Time Between Failure | >5000hours | |||||||||||||
Life time | 100000hours | |||||||||||||
Life-all-white(brightness halving) | 50000hours | |||||||||||||
Environment temperature range | Operating temperature range: -20-45℃ Storing temperature range: -30-65℃ | |||||||||||||
Maximum power:/㎡ | <1100W | |||||||||||||
Average power:/㎡ | <280W | |||||||||||||
Self-check technology | LED spot self-check, communications check, power check, temperature monitor(need customization) | |||||||||||||
Remote monitoring | Remote supervision and control, record potential fault, send out warning signs to the operators.(need customization) | |||||||||||||
Software environment | WindowsNT,Windows1999,WindowsXP | |||||||||||||
Luminous point width between centres | Deviation<3% | |||||||||||||
Brightness uniformity | <10% | |||||||||||||
Color uniformity(chromaticity coordinate) | ±0.003 | |||||||||||||
Power supply request | AC85-264V(50Hz-60Hz) | |||||||||||||
Contrast | (1000:1) | |||||||||||||
System protection | Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration | |||||||||||||
Humidity(working) | working:10-95% | |||||||||||||
Humidity(storing) | storing:10-95% |
Our case
♦ Production process:
1) Incoming Inspection→2) SMD→3) Plug-in
→4) Wave Soldering→5) After Welding→6) Testing
→7) Semi Finished Aging→8) Module Assembly
→9) Gluing→10) Finished Aging→11) Detection Finishing Warehousing
♦ Packaging and shipping
1. Delivery time: Accomplish manufacturing within7- 15 days after receiving the deposit.
2.Before delivery, we will test the display, and keep it light up for 72 hours, and check all the parts of the display to confirm it is OK for delivery.
3.Package:(1)carton (2) anti-shaking wooden case (3) flight case
♦ Why choose us:
Continues Quality
With more than 10 years experience in led display producing,equipments are updated regularly.What’s
more,unique standardized and module production ensure our products continuous quality.
Competitive Price
With large scale production capacity and professional production technology,our company have built
effective modular production.We always stick to promote the technical innovation and reduce cost to
benefit customers.
Fast Delivery
Once we promise the delivery date,we will try our best to fulfill it.Special procedures such as emergency
inventory will be used to maintain your uninterrupted supply of the products.
Perfect Service
Pre-sales:Your purchasing requirements will be highly valued and we’ll recommend suitable products to
you.
After-sales:We will track the products usage and then constantly perfect our products.
FAQ
Q1: How to choose the LED screen suitable for my needs?
A1: When you choose a led screen, you only need to consider three
simple questions.
1. Will you use it indoors or outdoors?
2. Is it for rental purpose (need to move from one place to another
often) or for fixed installation (to be installed in one place
forever)?
3. What is the length and width of the LED screen you want to buy?
Q2: Which pixel pitch should I choose?
A2: There are many differences from 1.25--16mm pixel pitch, in
principle it is so-usually indoor LED screens use smaller pixels
(1.25mm-10mm), outdoor LED use larger pixels (2.5mm-16mm) screens (
For example, huge highway ads).
Q3: Which control system should I choose?
A3: There are synchronous and asynchronous control systems on the
market. For large-size LED screens (usually more than 20 square
meters), you need to use a synchronous control system; when it is
less than 20 square meters, you can use synchronous or
asynchronous. For asynchronous control systems, you can choose to
use wifi, 3G, 4G and other wireless control.
Q4: How to order from your factory?
A4: You can place an order with RGX through Alibaba online or
offline transactions, please contact us to confirm before placing
an order.
Q5: How to pay?
A5: We accept payment online via Alibaba, or offline to our company
account via T / T, Paypal or Westerunion.
Q6: How to ship?
A6: This is optional, and we respect our customers choices. You can
choose to ship by air, DHL (FedEx, UPS, TNT, EMS, etc.)
international express company, or by sea according to the weight,
volume and required delivery time of the goods.
Q7: How to install after receiving?
A7: We will provide you with drawings to guide you through the
installation. We can also provide drawings of steel structures,
software settings drawings or photos, or send our engineers to help
you when needed.
Shenzhen ShiXin Display Technology Co.,Ltd
Shenzhen Shichuangxinke Electronic Co., Ltd. (Shenzhen SCXK Electronic.) was established in 2009 with 5 million yuan registered capital, which is a professional LED display and lighting manufacturer. The company administer Shenzhen Shixin Display Technology Co., Ltd. and Hong Kong Shichuangxin Technology. Co., Ltd.; which located in Yongxing Industrial Park, Dalang Street, Longhua District, Shenzhen, China, with a production area of over 3,000 square meters. Since its inception, Shichuangxinke (SCXK) has maintained rapid growth, have been sold to more than 130 countries and regions, and then Shichuangxinke brand has been highly recognized in the world.
Shichuangxinke insists on “customer first, integrity first, innovation, and strive for perfection” as its brand management philosophy. We are constantly working hard to be a responsible person. We have been using advanced technology, pursuing innovation, producing the highest quality products, and treating every order as our honor project. In order to make our products perfect, we have introduced the most advanced production equipment and testing equipment to maintain strict quality standards for each production process. Through these efforts, our products have passed many certifications, such as CE, UL, CCC, FCC, ROHS, SASO and so on.
Shichuangxinke products quality management strictly follows the ISO9001:2008 certification system and 7S management standards, and strives to be more perfect, which has a profound impact on the standardization of the LED industry.
Here, we promise that every customer, every order and every feedback will be valued by Shichuangxinke. Let us join hands and make "a more beautiful world, let products travel all over the world" as our mission to create a more colorful and more beautiful world.