
P10 Led video wall panel curtain, fixed advertising Led display 1R1G1B, 1920hz refresh rate
♦ The Strongest:
anti-striking, broken-resistant, and safe with special materials of macromolecule.
♦ Wireless:
displaying, driving and receiving are integrated to simplify the complex inner structure, improving its safety and stability.
♦ Technical specification
outdoor SMD P10 | ||||||||||||||
Resolution/mm4 | ||||||||||||||
Pixel configuration | 1R1G1B | |||||||||||||
Pixel density/pixels/m² | 10000/m² | |||||||||||||
Module resolution | 32x16 | |||||||||||||
Module size/mm | 320x160 | |||||||||||||
View distance | 8-500m | |||||||||||||
Single point brightness adjust | Can be added | |||||||||||||
Single point color adjust | Can be added | |||||||||||||
White balance brightness | >8000cd/㎡ | |||||||||||||
Color temperature | 6500K-9500K | |||||||||||||
Horizontal view angle | 120(degrees) | |||||||||||||
Vertical view angle | 60(degrees) | |||||||||||||
Signal Process bit | 10 or 16bit | |||||||||||||
Grey process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 | |||||||||||||
Control distances | Internet cable:100m, multimembrane:500m, monofilm:2km | |||||||||||||
Driving mode | Constant driving current | |||||||||||||
Scanning mode | (1/8) | |||||||||||||
Frame rate | 60Hz | |||||||||||||
Refresh frequency | >3000Hz | |||||||||||||
Control mode | Computer synchronous | |||||||||||||
Brightness adjusted range | Manual, automatic operation, stepless continuous adjusted 255 steps. No grey loss | |||||||||||||
Out of control point | <1/10000 | |||||||||||||
Working hours | ≥72hours | |||||||||||||
Mean Time Between Failure | >5000hours | |||||||||||||
Life time | 100000hours | |||||||||||||
Life-all-white(brightness halving) | 50000hours | |||||||||||||
Environment temperature range | Operating temperature range: -20-45℃ | |||||||||||||
Maximum power:/㎡ | <1000W | |||||||||||||
Average power:/㎡ | <350W | |||||||||||||
Self-check technology | LED spot self-check, communications check, power check, temperature monitor(need customization) | |||||||||||||
Remote monitoring | Remote supervision and control, record potential fault, send out warning signs to the operators.(need customization) | |||||||||||||
Software environment | WindowsNT,Windows1999,WindowsXP | |||||||||||||
Luminous point width between centres | Deviation<3% | |||||||||||||
Brightness uniformity | <10% | |||||||||||||
Color uniformity(chromaticity coordinate) | ±0.003 | |||||||||||||
Power supply request | AC85-264V(50Hz-60Hz) | |||||||||||||
Contrast | (1000:1) | |||||||||||||
System protection | Moistureproof,dustproof,high temperature protection,anti-corrosion,anti-burning,anti-static,anti-vibration | |||||||||||||
Humidity(working) | working:10-95% | |||||||||||||
Humidity(storing) | storing:10-95% |
Star Product, Superb Quality
The P5 LED Display is manufactured by using best quality material, purchased from most reputed vendors. The final products feature supreme quality and offers best outputs. High refresh rate and gray level ensures the picture quality remains seamless.
We spend some time with every detail of the product, so that you can enjoy every detail of your marketing pictures. The pixel-perfect pictures are a treat to watch. It means, you will not miss any detail in the picture, video or text displayed on the screen
Perfect calibration between brightness and chromaticity delivers best picture quality at every place. The brightness difference is set to less than 2%, and chromaticity difference is less than 0.005. You may also adjust the brightness and chromaticity as per your choice.
♦ Production process
1) Incoming Inspection→2)SMD→3)Plug-in
→4) Wave Soldering→5)After Welding→6)Testing
→7) Semi Finished Aging→8)Module Assembly
→9) Gluing→10)Finished Aging→11)Detection Finishing Warehousing
Fast Delivery
Once we promise the delivery date,we will try our best to fulfill it.Special procedures such as emergency
inventory will be used to maintain your uninterrupted supply of the products.
Perfect Service
Pre-sales:Your purchasing requirements will be highly valued and we’ll recommend suitable products to
you.
After-sales:We will track the products usage and then constantly perfect our products.
Our team will be forever here to offer you full supports
Shenzhen ShiXin Display Technology Co.,Ltd
Shenzhen Shichuangxinke Electronic Co., Ltd. (Shenzhen SCXK Electronic.) was established in 2009 with 5 million yuan registered capital, which is a professional LED display and lighting manufacturer. The company administer Shenzhen Shixin Display Technology Co., Ltd. and Hong Kong Shichuangxin Technology. Co., Ltd.; which located in Yongxing Industrial Park, Dalang Street, Longhua District, Shenzhen, China, with a production area of over 3,000 square meters. Since its inception, Shichuangxinke (SCXK) has maintained rapid growth, have been sold to more than 130 countries and regions, and then Shichuangxinke brand has been highly recognized in the world.
Shichuangxinke insists on “customer first, integrity first, innovation, and strive for perfection” as its brand management philosophy. We are constantly working hard to be a responsible person. We have been using advanced technology, pursuing innovation, producing the highest quality products, and treating every order as our honor project. In order to make our products perfect, we have introduced the most advanced production equipment and testing equipment to maintain strict quality standards for each production process. Through these efforts, our products have passed many certifications, such as CE, UL, CCC, FCC, ROHS, SASO and so on.
Shichuangxinke products quality management strictly follows the ISO9001:2008 certification system and 7S management standards, and strives to be more perfect, which has a profound impact on the standardization of the LED industry.
Here, we promise that every customer, every order and every feedback will be valued by Shichuangxinke. Let us join hands and make "a more beautiful world, let products travel all over the world" as our mission to create a more colorful and more beautiful world.